Also, we decided to do a couple of optional operations to our stakes at this point. The first was install an extra set of bulkheads inside of the door to give us a pocket for fuel testing, etc. This pocket was also completed with a drain in case rain or dew were to condense in […]
Read More
Here are the power distribution sheets for our aircraft, as well as the Approach Hub wiring diagrams. Essential Power and Battery Bus Main Power Bus Sheet 1 Main Power Bus Sheet 2 Main Power Bus Sheet 3 Main Power Bus Sheet 4 For formatting only Lorem ipsum […]
Read More
Once the airplane is rolled over, the top strake to spar join is made by filling the recess between with micro and covering with two BID. Then the Outboard and rear bulkheads can have their top to strake skin bonds laid up. Also, while the plane was upside down we made a repair to the pilot […]
Read More
We’ve decided on Oregon Aero to do our upholstery and temper foam the seats. They were nice enough to offer to ship us their “standard Velocity” foam package at no charge to see if that would meet our need, or allow us to give them input for our seats. We’ll ship them the seats for custom foam […]
Read More
Currently taking bids on the seats, consequently we’ve begun work on the LCD display mounts for the seatbacks. We will be installing a DVD system for the rear seat passengers. We ended up going with Oregon Aero for our upholstery, and picked some nice grays for the interior color. This theme will be matched throughout the cabin. They custom […]
Read More
Before installing the upper strake half, all of the interior surfaces are covered with Jeffco Fuel sealant. And the fuel intake screen is installed. Next the bulkheads and baffles have a significant (about 1/4″) mound of Jeffco and flox spread on them top stake skin is carefully set in place, with the ground wire exiting […]
Read More