OK, here’s the deal on Master Cylinders, and a real no holds barred data dump. Very important, shouldn’t be a big deal. The only thing is this the modification mentioned below in 10.5.3, where we pulled the pedal mounts to the very outside of the pedal cross tube, which pretty much centers the pedals. That’s […]
Read More
This is a roddy good section, with plenty of good acting as they say in Python. Actually, this is better suited to Princeton basketball, because there are tons of layups to be done. The first is to bid the top and bottom of the spar to the firewall, and the little chamfered openings on the […]
Read More
This is a roddy good section, with plenty of good acting as they say in Python. Actually, this is better suited to Princeton basketball, because there are tons of layups to be done. The first is to bid the top and bottom of the spar to the firewall, and the little chamfered openings on the […]
Read More
Installing the main gear bushings in the fast build fuselage seems easy enough, right. It’s all done, just pop the bolt out, mix up some structural adhesive, put the bolts in, and snug it up. It does seem simple, I admit, but apparently as Hamlet said “I know not seems”, because once the bolts are […]
Read More
We completed this section in one long evening of work. We used the marks made with Frank during Head Start (and a leveled aircraft) as a starting point, re-verified the plumb-ness of the the outboard hardpoints, the level of the spar, and the sweep to the “nose bolt hole”. Actually, this part was difficult due to the […]
Read More
We completed this section in one long evening of work. We used the marks made with Frank during Head Start (and a leveled aircraft) as a starting point, re-verified the plumb-ness of the the outboard hardpoints, the level of the spar, and the sweep to the “nose bolt hole”. Actually, this part was difficult due to the […]
Read More