This section is simple enough, just take 3/16″ nylaflow tubing from 6″ aft of the attachment point on the pedal assembly, through the carbon beam, sweeping gently up to the top of the gear bulkhead and extending slightly out the back of the firewall. The only real trick here is that the recommended method of taping this line down didn’t work too well for me while the small sections of BID were setting up and I had to try all manner of weights and things to hold them in place. We tacked these down better later, which can be seen here.
Left Rudder Conduit |
Rudder Cable Nylaflow |
Posted By: Brett FerrellThursday August 8th, 2002 at 12:20 PM