2002 – N954PB – Scott Bowers – Velocity SE/RG – Valkaria, FL – 1

After departure the flight turned left departing the traffic pattern. As the airplane was flying westbound away from the airport, witnesses saw it lose altitude. The airplane turned to an easterly heading back towards the airport, the witnesses said the airplane was very slow and wallowing, it appeared to be in an unusual attitude, with […]

Read More
Mounting torque tube and counterweight arms

Mounting torque tube and counterweight arms

There is simply a ton of work to do on the canard and elevators. This section talks about the center hinge are, but as you can see above we lined this out and installed it during Head Start week with the rest. Then we measured from the center hinge out 20 1/2″ onto both elevators and trimmed […]

Read More
2002 – N394BL – Bill Huene – Velocity XL/RG – Fresno, CA – 0

2002 – N394BL – Bill Huene – Velocity XL/RG – Fresno, CA – 0

The pilot reported that while descending in preparation for landing, he noticed an unusual sound from the engine and noted a loss of oil pressure, followed by a loud thud, a vibration, and a total loss of engine power. A forced landing was made to an open field. After the aircraft came to a stop […]

Read More

Spar, Gear, and Bulkhead Updates

Center Section Spar, Landing Gear, and Bulkheads chapters are complete!   For formatting only Lorem ipsum dolor sit amet, consectetur adipisci elit, sed eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem ullam corporis suscipit laboriosam, nisi ut aliquid ex ea commodi consequatur. Quis aute iure reprehenderit in voluptate velit […]

Read More
Install Nylaflow Tubing for Rudder Cables

Install Nylaflow Tubing for Rudder Cables

This section is simple enough, just take 3/16″ nylaflow tubing from 6″ aft of the attachment point on the pedal assembly, through the carbon beam, sweeping gently up to the top of the gear bulkhead and extending slightly out the back of the firewall. The only real trick here is that the recommended method of […]

Read More

Center Spar Set

Center Spar has been set, and Master Cylinders installed!       For formatting only Lorem ipsum dolor sit amet, consectetur adipisci elit, sed eiusmod tempor incidunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrum exercitationem ullam corporis suscipit laboriosam, nisi ut aliquid ex ea commodi consequatur. Quis aute iure reprehenderit […]

Read More
1 199 200 201 202 203 225