WxWorx Receiver Installed

Here is our new GRT panel, running in anger as it were, with a good satellite lock. Next we’ll set up the weather unit and calibrate the engine instruments, and we’ll be ready to run the motor. Eat your heart out, Andy. ;-0 GRT with GPS lock GRT WX (XM) weather unit installed

Pitot/Static Connections by Stein

The latest Kitplanes had an article by Stein about this nylon tubing and connector system that he’s been using. I really liked the look of it, and wasn’t totally happy with all of the different tubing systems that I’d been using. So I decided to switch to it. A nice side benefit is all of the pitot tubing is […]

Mounting EIS Outside Temperature Probe

Here you can see that I’ve drilled a hole for the EIS Outside Air Temperature probe, and the fuselage was too thick for the nut to hold it on. I removed the inner skin and foam, shaped it, and laid 4 BID in the recess. After curing, I drilled the hole back out and installed […]

GRT First Power Up

So, Blue Mountain is officially out of business. I hate to see them go, but the writing was on the wall. But, I’m firmly on the GRT path. This weekend we had a EAA meeting, so that sort of boogered up working on the plane, but I did finish wiring up the GRT and powered […]

Mounting GRT Dual AHRS

So, I picked up these snazzy quick disconnect couplings from US Plastics right here in the buckeye state, with 1/8″-27 NPT shut-off connections on the instrument side (to keep dust out of the instrument), and hose barb connections on the airplane side. I got the 1/4″ flow size, and 1/8″ and 1/4″ hose side connections. […]

Mounting the Trio Autopilot

Our new Trio Pro autopilot (with ‘auto-trim’) has arrived! Getting the head unit in was pretty straight-forward, we’d already planned for it, just zip the 3 1/8″ hole open, and bolt her in. We’ll get to the servos down the road here. Trio Pro Autopilot Autopilot installed