The majority of the speed brake work was done during our visit to the factory’s Head Start program. After taking inventory of our parts and getting the doors and keel off of the airplane, we cut the indicated door out of the bottom center of the fuselage.
As with all cut outs of this type, the foam in between the two skins of the fuselage is sanded out about 1/8″ deep, and is filled with microglass and covered with BID.
Posted By: Brett FerrellMonday June 10th, 2002 at 1:57 PM
Categories: Speed Brake Tags: Building Fuselage Head Start Speed Brake