I decided to build upholstery covers for my fuel gauges to hide the LED lighting units. To do this I bought an extra bubble from Vance Atkinson and covered it in duct tape, then laid 2 BID over top. Once that cured I cut the bubble area out with a Dremel and put the light in place with rolled over duct tape. I then glassed the light into the frame against the bubble. Once cured I had a removable cover with the light attached.

Posted By: Brett Ferrell
Saturday March 12th, 2011 at 8:48 PM

Categories: Fuel Gauge Covers
Tags: Building Fuselage Interior