So, you get the idea at this point. This wing was in pretty good shape, but there were several “dimples” that needed filling (most of which actually got filled), and a couple of spots on the outboard end that needed some real (not a ton, but a fair amount of) fill. We filled it, and sanded it out, and then sprayed. I officially think we need to wet sand with 400 prior to spraying primer, because we again struggled with getting the primer layer smooth, and ended up respraying that layer. We’re finally painted, though, and hopefully can sand it out this week and be completely done with the wings!
Pilot wing prep |
Pilot wing prep |
Posted By: Brett FerrellMonday May 25th, 2009 at 11:03 AM