For the bulkhead reinforcement we cut 8 8″-18″ pieces of Triaxial lengthwise, and trimmed it into an “L” to fit the canard cut-out. The sections overlap the opening by 4″ above and below, and extend onto the bulkhead by 5″, 2 plys each.
Canard Bulkhead Reinforcement – Bulkhead Side |
Canard Bulkhead Reinforcement – Fuselage Side |
Torsional Reinforcement |
Posted By: Brett FerrellThursday June 13th, 2002 at 12:29 PM
Categories: Canard Fuselage Tags: Building Bulkheads Canada Fuselage